1)Equipment introduction
Our company's aluminum plate and strip quadruple irreversible cold rolling mill has advanced hydraulic automatic gauge control system AGC; It has many kinds of shape control methods, such as roll inclination, positive and negative bending of work roll, roll sectional cooling; At the same time, it is equipped with automatic measuring and centering device for coil loading, which can realize the automatic operation of coil loading and unloading, gradually reduce the operation intensity, improve the yield and increase the competitiveness. The mill is also equipped with a variety of complete auxiliary systems, such as safe and reliable CO₂ automatic fire extinguishing system, lubrication system, dry air blowing device, etc., which provide a reliable guarantee for the production of high-quality products.
2)Equipment specification
Material: Aluminium and Aluminium Alloys | ||
Max. strip width |
2050 |
mm |
Max. entry thickness |
8 |
mm |
Min. exit thickness |
0.15 |
mm |
Max. coil weight |
26 |
t |
Max. rolling force |
2000 |
t |
Max. rolling speed |
1000 |
m/min. |
Max. winding speed |
1350 |
m/min. |
3)Product application
Cold rolling refers to the production mode of rolling below the recrystallization temperature. During cold rolling, dynamic recrystallization will not occur. When the temperature rises to the recovery temperature at most, the cold rolling will appear work hardening state. The work hardening rate is high. The cold rolled strip has high dimensional accuracy, good surface quality, uniform structure and properties. Products in various states can be obtained with heat treatment.
It refers to the rolled products with rectangular cross section, uniform thickness and greater than 0.2mm obtained by cold rolling. Usually the edges are cut lengthwise and delivered in rolls.
Alloy |
Purpose |
1050 |
Radiator fins, Kitchenware |
1070 |
Punching and extruding billet |
1100 |
Label plate, thick foil, rolled products, PS plate base |
1200 |
Deep processing foil, kitchenware, food and drug foil |
1350 |
Electrolytic capacitor foil |
3003 |
Building board, kitchenware, thick foil |
3004 |
Welding pipe, hose, car interior decoration, bright plate (polished plate) |
3105 |
Drainage channel, window frame, pipe, label, roofing material, light board, decorative pattern, smooth shape, bottle cap |
5052 |
Sheet metal for general use. Trailer plate, punching and extruding blank, van plate, label |
8011 |
Household foil, radiator fin, building board, food dish and plate |
4)Equipment parameters
Installed power |
8570 |
KW |
Water consumption |
760 |
M3/h |
Consumption of compressed air |
2100 |
M3/h |
Natural gas consumption |
0 |
M3/h |
Floor space |
53000x35000x14500 |
Mm(lxwxh) |
http://www.hykjgs.net/